News
Current Position： Home
> News
The power requirements and simple system of the gas mold temperature machine
announcer：admin
The power of the gas temperature controller is based on customer needs, and its temperature control accuracy is ±1℃, which saves more than 30% of electricity. The internal pipeline stainless steel is integrally formed, the heat loss in the pipe is small, and the heating is uniform. The unique heating design of the pipeline explosion-proof device and temperature automatic control can quickly reach the temperature requirements of various products.
The gas temperature controller needs to improve production efficiency and effectively ensure the quality of its products. The temperature rise and fall speed is fast and the temperature is uniform and stable. The automatic exhaust and oil return temperature display at startup is controlled by imported microelectronics or PLC. The temperature accuracy can be controlled within ±1 Degree to achieve automated management.
The gas mold temperature controller combines a gas heat-conducting oil boiler, a flue gas waste heat utilization device, a high-level tank, a circulation pump, a combustion system, a PLC control system, an oil-gas separator, etc., and leaves the factory after assembly. After being delivered to the user's site, it can be used as long as it is connected to the gas, electricity, and thermal oil import and export. No special boiler room is required. Due to the one-key operation, no special furnace worker is required.
The gas saving of the gas mold temperature controller is mainly reflected in the use of flue gas waste heat. The gas mold temperature machine comprehensively utilizes the high-temperature flue gas of the gas heat conduction oil boiler 200 or more than 300 degrees through the waste heat utilization device, and the exhaust temperature is only about 75 ℃. The air that enters the furnace to support combustion through the burner can reach more than 100 ℃. According to the measurement of users in many industries, the gas mold temperature machine can save more than 10% gas compared with the same specification of heat conduction oil boiler.
In addition, the equipment of the gas mold temperature controller is highly integrated, the system is simple, the resistance is small, the temperature can be controlled within ± 3 ℃, generally installed near the heating equipment, PLC control does not need to be on duty.
The hardware configuration of the gas mold temperature controller is particular. Imported gas combustion system components, PLC control systems, and thermally conductive oil circulation pumps with stable production performance have been calculated by many companies. The gas mold temperature controller saves more than 10% gas compared with the same specifications of heat conduction oil boilers Compared with the steam boiler of the same specification, it saves more than 30% gas, and the energy-saving benefit is very obvious. At present, it has been applied in nearly 1,000 companies such as sheet metal, rubber, plastic grate, reaction kettle, shoe material, waterproof, labor insurance materials and so on.